Tanantornanutra / iStock / Getty Images Plus
What kind of tool steel is used for stamping M19 (silicon electrical steel) for motor laminations? What are the pros and cons of the different tool steels and coatings? Brass Stamping Parts
Silicon electrical steel, or lamination steel, is a low-carbon steel (usually below AISI 1006) with silicon added to it. Since the iron in steel has a high electrical conductivity, the eddy current losses created in stacking are proportionally high. The addition of silicon to the steel reduces the eddy current losses and electrical conductivity, improving the ability of magnetic fields to penetrate it and reducing the steel’s hysteresis losses.
As a general term, hysteresis means a lag between input and output in a system upon a change in direction. With magnetic materials, if a varying magnetizing signal is applied, the resulting magnetism that is created follows the applied signal, but with a delay.
Lamination steel is used in many applications in which electromagnetic fields are important, such as transformers and electric motors. While adding silicon improves the steel’s magnetic properties and corrosion resistance, the main purpose is to improve the steel’s hysteresis losses—again, the lag between the time when a magnetic field is first generated or applied to the steel and when the field fully develops.
The presence of silicon in this steel is usually around 3% to 5%, which makes the steel brittle and harder to stamp. Since lamination thickness is usually small, about 0.020 in., the production orders are usually in high numbers. For example, the stator of a 1/2-HP motor contains about 250 to 300 laminations.
The presence of silicon in the steel has a negative effect on the wear of the tool that is used to stamp it, so take special care when designing a die to stamp lamination steel:
A variety of tool steels and carbides are used to stamp lamination steel, depending on the production volume: high-carbon steel, high-chrome steel (D-2), high-speed steel (M-4), and carbide (CD-260).
For low-quantity orders around 200,000 parts, build the die from D-2 steel heat-treated to RC 60 to 62, which offers a die life of 2 million to 3 million parts. For higher order quantity of about 500,000 parts and a die life of 4 million to 5 million parts, use high-speed steel (M-4) heat-treated to RC 62 to 64. In both of these cases, coating the punch and die with titanium nitride will prolong die life.
For orders around 1 million parts and a die life of 10 million parts, build the die from carbide (CD-260), which has a hardness around RC 70 to 72. You could apply vanadium carbide to the carbide punch and die to enhance wear resistance and prolong die life.
See More by Thomas Vacca
Has a shop floor stamping or tool and die question stumped you? If so, send your questions to firstname.lastname@example.org to be answered by Thomas Vacca, director of engineering at Micro Co.
Read more from this issue
STAMPING Journal is the only industrial publication dedicated solely to serving the needs of the metal stamping market. Since 1989 the publication has been dedicated to covering the cutting-edge technologies, industry trends, best practices, and news that help stamping professionals run their businesses more efficiently.
Easily access valuable industry resources now with full access to the digital edition of The FABRICATOR.
Easily access valuable industry resources now with full access to the digital edition of The WELDER.
Easily access valuable industry resources now with full access to the digital edition of The Tube & Pipe Journal.
Enjoy full access to the digital edition of STAMPING Journal, which serves the metal stamping market with the latest technology advancements, best practices, and industry news.
Easily access valuable industry resources now with full access to the digital edition of The Fabricator en Español.
Welding instructor and artist Sean Flottmann joins The Fabricator Podcast live at FABTECH 2022 in Atlanta to chat...
© 2023 FMA Communications, Inc. All rights reserved.
Stamping Tools Not yet registered? Sign up